Chronoexpo Graphic Sizes

Please note...
Finished graphic dimensions are important.
They affect the amount of tension that is exerted on the frame.
This in turn affects the ability of the panels to lay flat
and display properly.

These tables indicate the ideal display dimensions and the appropriate "cut" in order to achieve a perfect set.
However, depending on the type of media and the tension you desire, it may be necessary to trim a little more
material to match your specific requirements.

Chrono2 Single Side (Inches) Note that the graphic length is slightly longer
in some cases to allow for attachment to the header and footer support rails.

Display Height

70 7/8

78 3/4

86 5/8

94 1/2

102 3/8

110 1/4

118 1/8

126

133 7/8

141 3/4

149 5/8

157 1/2

Graphic Length

70 7/8

78 15/16

94 7/8

102 3/4

110 5/8

118 1/2

126 3/8

134 1/4

142 5/16

150 3/16

158 1/16

Chrono2 Single Side (cm) Metric

Display Height

160

180

200

220

240

260

280

300

320

340

360

380

400

Graphic Length

160

180

200.5

221

241

261

281

301

321

341

361.5

381.5

401.5

Chrono2 Single Side Widths Hardware widths and graphic width should be equal.

Hardware and graphic width in inches	11 13/16	15 3/4	23 5/8	31 1/2	35 7/16	39 3/8	47 1/4
Hardware and graphic width in cm	30	40	60	80	90	100	120

Chrono2 Double Side Height (in inches) Note that the graphic length is slightly longer
in some cases to allow for attachment to the header and footer support rails.

Display Height	23 5/8	43 5/16	63	70 7/8	78 3/4	86 5/8	94 1/2	102 3/8	110 1/4	118 1/8
Graphic Length	26 3/8	46 7/16	66 1/8	74	81 7/8	89 3/4	97 5/8	105 1/2	113 3/8	121 1/4

Chrono2 Double Side Height (cm) Metric

Display Height	60	110	160	180	200	220	240	260	280	300
Graphic Length	67	118	168	188	208	228	248	268	288	308

Chrono2 Double Side Width Hardware widths and graphic width should be equal.

Hardware and graphic widths in inches	11 13/16	15 3/4	23 5/8	31 1/2	35 7/16	39 3/8	47 1/4
Hardware and graphic widths in cm	30	40	60	80	90	100	120