ReTac WipeErase white dry erase film

SPECIFICATION AT A GLANCE

A dry erase board in a roll

ReTac WipeErase is a white dry erase film with a white gloss, hard coat finish with ReTac ultra removable adhesive.  ReTac WipeErase has a chemical and scratch-resistant UV hard coat and a clear gloss surface that safeguards against ghosting or staining from ink. Its anti-graffiti properties also allows for easy removal of permanent marker, such as Sharpies.

Typical applications include indoor dry erase or planning boards, menu boards, conference room walls, courtroom graphic displays, maps, calendars, sports coaching, hospital message boards and many other applications where different information needs to be communicated.

Great alternative to replacing a whiteboard

When compared to other high quality dry erase boards, ReTac WipeErase is remarkably easy to erase. Its anti-graffiti properties also allow for easy removal of permanent marker with rubbing alcohol. ReTac WipeErase has ReTac on the back which allows removable dry erase graphics to stick to virtually any smooth surface and be removed cleanly years later!

Retac WipeErase is a 6 mil (150μ) durable high quality dry erase film with a white gloss, hard coat finish and ReTac ultra removable adhesive protected by a PE coated Kraft release paper siliconized on the release side. Possessing anti-graffiti qualities, it offers a truly superior combination of resistance against scratches, abrasion, water, solvents, stains, and chemicals. This specialty film is for indoor use and not printable.

Product specialist quotes

“Whiteboards often suffer from ‘ghosting’, making them look grey and shaded. In time, the pens used on these boards scratch the surface and when rubbed off leave a very faint impression of previous writing. Once this has happened, there is no way of repairing the whiteboard itself and so the ghosting needs to be put up with, or the board replaced. A sheet of one of our WipeErase products applied to a dry erase board essentially makes it as good as new and is considerably cheaper than replacing a whiteboard. Do this across a whole organisation and the savings could be huge.”

“WipeErase films and overlaminates are resistant to scratches, water, solvents, stains and chemicals and are very easy to handle, apply and remove. They are a flexible and great value solution to a broad range of indoor presentation requirements.”

These films are not printable.

A permanent version of the film is available.

Get answers and advice

Our goal is to answer all your questions in a timely manner.

NEED TO REQUEST A SAMPLE?

Our sales and customer service team would be happy to help!

REQUEST MORE INFORMATION

PART NUMBERS & SIZES

ReTac WipeErase
RWE25010 - 25.5” x 10’ (648mm x 3m)
RWE30050 - 30” x 50’ (762mm x 15m)
RWE60150 - 60” x 150’ (1524mm x 46m)
WipeErase White (Permanent)
PWE50150 - 50” x 150’ (1270mm x 46m)
PWE60150 - 60” x 150’ (1524mm x 46m)
ReTac WipeErase
RWE30033 - 760mm x 10M
RWE30164 - 760mm x 50M
RWE60033 - 1520mm x 10M
RWE60164 - 1520mm x 50M